Honcho
0
0

Skudo HT Commercial Mat

HTCM250
AU$730.00
In stock
1
Product Details


The HT Commercial Mat is an engineered, purpose built, temporary surface protection system.

Designed with a highly durable topical surface, the mat is ideal for protecting concrete, while allowing the slab underneath to breathe. Reducing the risk of hydration (cure) lines.

The HT Commercial Mat protects from light machinery damage, spills, water, rust, paint, dirt, angle grinding & welding sparks and more.

Protects surfaces for up to 12 months internally and 9 months externally.


The Skudo HT Commercial Mat (2m x 37.5m roll) can be used as either:

(a) Loose Lay (one-part system)

or

(b) Temporarily Adhered with Skudo Base Coat (two-part system)

Request a Quote


FOR MORE INFORMATION ON THIS PRODUCT, PLEASE CHECK OUT THE 'PRODUCT RESOURCES' TAB BELOW.

Specifications

Mat / Roll

  • Product code: HTCM250
  • Dimensions: 2m x 37.5m
  • Square meterage: 75 sqm
  • Colour: Orange
  • Weight: 35kg
  • Available in single rolls

Base Coat

  • Product code: BCC20L
  • Spread rate: 3.5sqm - 4sqm / 1litre (spread dependent on concrete finish)
  • Colour: White
  • Weight: 20 kg
  • Available in single buckets

Provides comprehensive temporary concrete slab protection from stains, scratches and construction damage lasting up to 9 Months on external slabs and 12 months on internal slabs. Composed of a two-part system, which includes a non-toxic base base coat and polyester matting, our concrete slabs protection is applied directly to concrete.

Flame-retardant, water-resistant, anti-microbial and UV stable, our temporary surface protection for concrete is world class.

Key Features
  • A versatile protection system able to be used either loose laid or temporarily adhered using Skudo Base Coat
  • Reliable surface protection for heavy construction site traffic
  • Breathable system
  • Superior spill, stain and water resistance (proven against flooding)
  • Resistance to UV, rust, impact, and welding splatter
  • Class 1 Fire/Flame retardant according to ASTM E 648 and NFPA 253 standards.
  • Antibacterial/Antifungal: Test-verified protection against bacteria and molds that cause infection. (ISO-20743)
  • Safer working surface
  • High slip resistance in wet and dry conditions
  • Seamless and stationary
  • Cleans surface upon peel up removal
Uses & Limitations
  • Protects most surfaces, including freshly placed concrete as early as 14 days. *Note: This is subject to slab thickness, mix design, weather, etc. *Please contact your Honcho Rep to determine suitability (please note: Ensure the surface pH is below 11.0 and relative humidity (RH) is 80% or lower prior to placing protection over the slab. We recommend moisture testing with a moisture meter, such as a Wagner Meter).
  • Protects concrete and terrazzo
  • Areas can be polished and protected before interior walls are erected. Framing can be placed over the top of the Commercial System, which then can be left in place underneath
  • Under scaffolding & shoring
  • Flooring and staircases
  • Works as a blank canvas for all types of construction marks and layouts - won’t stain or damage surface


Limitations:

  • Do not dilute.
  • Should not be applied to concrete exposed to excessive moisture.
  • Skudo must be kept dry for 24 hours after installation.
  • Do not apply if the temperature of the concrete or air temperature is below 40º F (4º C).
  • If installing over sealed, guarded or protected concrete or terrazzo, it is critical sealer is fully cured. Dry to the touch is not sufficient. Always consult a Skudo Representative for compatibility.
  • When installing loose lay (dry lay), avoid excessive taping on the overlap of the matting, to assist with minimising the possibility of hydration marks*.
  • If the Commercial System (application of mat & base coat) is exposed to excessive standing water, extremely heavy rainfall or drainage runoff, water can soften the mat, breaking the bond between the protected substrate and
  • Skudo Base Coat. If this occurs, normal light traffic may damage the Mat. Drain or squeegee water off the affected area and attempt to keep traffic off the mat until it has dried. Once dried, the mat will return to its original strength and in most cases will re-adhere to the substrate.
  • *Please make sure to speak with your Honcho representative prior to product selection, as some substrates, such as, but not limited to concrete, terrazzo, and stone, may not be suitable in certain circumstances’.
Product Resources

Honcho Specialty Concrete Protection Product and Application Sheets

Skudo HT Commercial System - product information sheet

Skudo HT Commercial System - application sheet

Skudo HT Commercial System - after application maintenance & repair guide

Skudo HT Commercial Loose Lay - product & application sheet

Skudo HT Commercial Mat - loose lay maintenance guide

The Ultimate Guide To Protecting Concrete - Like A Boss

Project Suitability and Usage Chart.pdf

Honcho - Tests & Reports

Skudo HT Commercial System - safety data sheet - HT Mat

Skudo HT Commercial System - safety data sheet - Base Coat

Skudo HT Commercial System - anti fungal test

Skudo HT Commercial System - texfin anti microbial report

Skudo HT Commercial System - slip rating

Skudo HT Commercial System - fire rating CFR

Skudo HT Commercial System - fire rating ASTM

Skudo HT Commercial System - permeability & water transmission

Skudo HT Commercial System - product data sheet

Videos

Skudo HT Commercial System application guide

Skudo HT Commercial System squeegee demonstration

Skudo HT Commercial System removal video

Skudo HT Commercial Mat Fire Rating Test

Zach from Skudo USA team explaining some of the benefits of the Skudo HT Commercial system

Skudo HT Commercial System overview video

Skudo Base Coat

Use Skudo Base Coat to temporarily adhere the Skudo HT Commercial Mat to concrete terrazzo, tile and expoxy surfaces.

Provides comprehensive temporary concrete slab protection from stains, scratches and construction damage, lasting up to 9 Months on external slabs and 12 months on internal slabs.

Base Coat

  • Product code: BCC20L
  • Spread rate: 3.5sqm - 4sqm/1 litre (spread dependant on concrete finish)
  • Colour: White
  • Weight: 20 kg
  • Available in single buckets

Buy Now

Save this product for later

ENQUIRE WITH HONCHO SUPPLIES

Get the answers you need, submit orders, and find out more information for all your site protection needs here. For a free quote, or to discuss delivery options to your site, send us a message and we will be in touch in 24 hours or one business day.

Contact Us

Share by: